Slow 2 Pro

Welcome back!

Broadway bridge in Portland

Being a current and very lucky owner of a Seven Cycles fully custom Titanium frame I have a great attachment to this brand. I use my Seven for everyday riding and training miles. One of the things few people get a chance to do is to get a full bike fitting before and after ordering a bike. To start out you tell/show your local fitter, in my case River City Bikes, your current bike. They take geometry measurements along with you likes/dislikes of the bike and note them. Then they measure a ton of your body parts, such as elbow to wrist, knee to ankle, waist to neck, foot size, the list goes on. After that first appointment they send the work sheet with all that info to Seven. A short while later Seven sends what they believe will be the absolute best frame geometry for you. My fitter had an adjustable stationary bike frame and showed me what it would be like. I gave them the thumbs up and multiple weeks my new frame showed up. If you consider this was over 5 years ago it must have made a good impression.

to how this affects you, Seven makes some amazing pieces of art you can ride and they now make triathlon frames, along with some sweet cyclocross rigs. The Kameha SLX is their Tri specific model that will definitely stand out in a crowd. A bike like this has panache that a large brand doesn’t have. Hipsters and tri-geeks a like will give you the thumbs up

Granted you might be able to get a carbon bike that is ever so slightly faster but 20 people at your next 70.3 will have one. I have never seen a Seven like mine. Now thats a good feeling Check them out, http://www.sevencycles.com/triathlon/kameha_slx.php

Brave the rain and cold, ride

Comments (0)

Vuma Chrono

One look at these cranks and you can guess they will not be cheap or ineffective. They use outboard style bearings like most performance cranks do nowadays. In the sizing category they went a little crazy with 6 lengths. This is probably a great thing for a pro that has access to a very sensitive power output measuring device. Besides the very smooth exterior of the crank face the cranks feature a very narrow 146mm Z factor. This is great because it keeps your knees inboard and out of the slipstream your movement creates. The biggest surprise to me is that they don’t have a single chain ring design; something we will most likely see in the pro-peloton at grand tour TT’s.

Nevertheless get a little less than $1300 ready to hang this piece of bling on your bike

Comments (0)